Missing Hardware Inventory & Monitoring Sensors on the ILO page after an ILO firmware update? If you just upgraded the BMC ILO firmware and didn't boot the machine then the Hardware Inventory & Monitoring Sensors page will be blank.
- You'll also notice that under the ILO Summary page, the description will read as:
| Description: | Proliant generic G6 |
instead of:
| Description: | DL160 G6 |
Fix:
- To get this back simply boot the system.
- Look for the line..."New Generic BMC Detected, Pre-Install a BMC SDRR/CFG". It will automatically update the BMC and the description on the summary page will change and the Monitoring Sensors page will come back.
 |
| Monitoring Sensor Data |
👽
No comments:
Post a Comment